Micromodel of Computer Emulational Simulation on Twin-roll Casting Strip Solidification Structure

Based on the research on the solidifiation of twin-roll casting strip,the analytical model and emulational model of nucleation,the growth of dendrity tip and colunar dendrity transformation to equiaxis dendrity (CET)of twin-roll casting strip solidification are established by means of the principle of metal solidification and modern computer emulational technology.The foundation for the emulational simulation of twin-roll casting strip solidification structure is laid.     

Numerical Analysis and Optimization of a Small Vehicle Heat Exchanger

This paper analyzes the fluid flow and heat transfer of the heat exchanger, and obtainsd the distribution of fluid field, heat field and pressure field in heat exchanger. According the analysis result, some modify measure is adopted, such as decreasing the number of tube bundle, the size of baffle plate and increasing the diameter of exchange heat tube. In the new heat exchanger, the resistance decreased 32.3%, is 103.2 Pa and the temperature of the exit is 130 K. The new heat exchanger satisfies the requirement of exchanging heat. The study indicates that adopting the numerical simulation method could get temperature, pressure and fluid - velocity of anywhere of the heat exchanger, and understand effecfing of structure parameter on fluid flied and heat flied of the heat exchanger. Therefore, it provides a new method for optimization design of heat exchanger.     

Requirement Model Based on UML 2.0 for Equipment MIS

This paper introduces the modeling of Unified Modeling Language with use case diagram and active diagram based on Rational Unified Process for Equipment Managemet Information System. It discusses the modeling mechanism and character of UML and develops the Computer Equipment management Information System Based Web using Rational Rose of UML CASE Tool. First, it is describe the authors how to analyze the structure of organize and build the model of structure organize. Second, they abstract the workflow of main operation in organize and build workflow model by active diagram. Finally, they abstract actor, use case with case diagram and finish the requirement model.     

直墙拱形巷道围岩应力场分析

为得出直墙拱形巷道围岩应力分布规律,应用复变函数弹性理论推导了直墙拱形巷道围岩应力分布的解析表达式。对直墙拱形巷道边界的围岩应力和巷道水平线方向的围岩应力分布规律进行分析,并考虑直墙拱形巷道断面高宽比和侧压系数对其影响规律。研究表明：在不同巷道断面高宽比、侧压系数下,直墙拱形巷道围岩应力集中区域主要集中在直墙底部底角处、拱形顶板中点附近和底板中部3个位置。不同巷道断面高宽比下,直墙拱形巷道沿水平线的应力分布规律基本相同。侧压系数大于1时,采用巷道断面高宽比小于1较有利于巷道稳定;侧压系数小于等于1时,采用巷道断面高宽比大于1较有利于巷道稳定。     

A PRACTICAL METHOD OF DESIGNING WALL BEAMS IN FRAMES

Brick masonry wall-beams in frames are girders,carrying brick masonrywalls in buildings with only one or two storied reinforced concrete frames atthe bottom of it.How to anaIyse and design such an element is an outstand-ing problem.In this case,there are no analytical and designing rules in thestate code in force.Therefore,designers have to seek other methods,in whichmost are very conservative and expensive.In order to change this case,thispaper provides an analytical and practical mathod for designers.     

双向电泳技术研究及其在农业生物蛋白质组学研究中的应用

双向电泳技术在蛋白质组学研究领域中处于核心地位。从样品制备、第一向等电聚焦电泳及第二向SDS-聚丙烯酰胺凝胶电泳、蛋白检测等关键环节方面对双向电泳技术的研究进展作了详细综述，并简要分析评价了以经典双向电泳为基础发展起来的差异凝胶电泳；同时重点介绍了双向电泳技术在农业生物蛋白质组学研究领域中的应用范围，为进一步开发利用提供参考；最后对双向电泳技术的发展前景作了展望。     

不同光照条件下番茄主要性状的变化及相关分析

耐弱光性不同的番茄品种（品系）对光照条件反应不同，确定番茄耐弱光鉴定指标，可以快速有效地从大量种质资源中筛选耐弱光的番茄品种，提高品种耐弱光选择效率；试验对耐弱光性不同的4份番茄品种（品系）于定植后进行遮光处理，分别研究各品种在不同光照下的光合特性、经济性状的变化，并对11个性状进行相关及通径分析。试验结果表明，在透光率为25%（平均光照强度的光通量约为230μmol/）的光照条件下，净光合速率、气孔导度、蒸腾速率、坐果率、单果重、单株产量均有不同程度的下降，且弱光下坐果率、弱光下净光合速率、弱光下胞间CO2浓度与相对单株产量直接通径系数分别为1.92、1.76、2.13，相关系数分别为0.53、-0.09、0.48。可见，弱光下的坐果率是鉴定番茄耐弱光性的可靠指标，弱光下净光合速率和胞间CO2浓度可作为耐弱光性鉴定的重要辅助指标。     

油初始坐果机制研究

以成年油木奈树为材料,对其初始坐果进行了研究。结果表明,盛花后2周内,油木奈出现大量的落花落果;幼果(子房)低水平的GA1 3与油木奈的落花落果高峰关系密切,而内源细胞分裂素ZRs和[diH]ZRs以及ABA与幼果(子房)的生长呈显著的正相关;初始坐果期,油木奈的雌配子体发育缓慢,且有相当数量的胚囊中途退化、败育,无法正常受精,从而导致其大量的落花落果。文中就油木奈的初始坐果机制进行了讨论。     

玉米穗腐病导致产量损失的品种和气候因素分析

1986～1990年的研究结果发现,在玉米穗腐病流行年份,抗病和感病玉米自交系的严量损失分别比常年高21％和35％。在气候因素中,日照时数对发病和产量损失影响较大。同一气候条件下感病系比抗病系产量损失大52％～82％。感病品种因穗腐病造成的玉水产量损失比不利的气候因素更为严重。